PRODUCTS | Hydrostatic Drives
| Mechanic Drive Torque | 3.000 Kgm | 29.420 Nm |
| Hydrostatic Drive Torque | 105 Kgm | 1.029 Nm |
| Auxiliary Outputs | |
|---|---|
| Max Torque available at shaft | |
| Maximum Speed | 3.950 rpm |
| Available ratios | 1/1-4,5/1, 0.98-4.41/1 |
| Power-pump outputs | kW |
| Control | Pneumatic |
| Hydraulic Pump distance is | 382 mm |
Weight: 210 kg
Equivalent to HT 380/3000, HT600/3000
Description
OPS-782 gearbox for combined drive systems is designed for vehicles with a drive train over 18 tons, calling for very low speeds and easy control during work (hydrostatic), and requiring mechanical drive be restored during transfer, so that top speed can be reached. Some application examples are; vehicles for street sweeper trucks and airport forwards (sweepers), high-pressure and vacuum cleaning vehicles, sewer cleaners and septic tankers, street flushers. Groups for the mechanical and hydrostatic drive with flange mounts for hydraulic pumps and motors. They are set up to a couple of hydraulic pumps and a hydraulic motor that, when connected through a hydraulic circuit, permits the conversion of the vehicle’s traction from mechanical to hydrostatic.
| Mechanical Drive Torque | 3.000 Kgm | 29.420 Nm |
| Hydrostatic Drive Torque | 100 Kgm | 1.000 Nm |
| Auxiliary Outputs | |
|---|---|
| Max Torque available at shaft | |
| Maximum Speed | |
| Available ratios | 1/1 - 4.5/1 |
| Power-pump outputs | 154 kW |
| Control | Pneumatic | operating air pressure range: 7-8 bar |
| Hydraulic Pump distance is: | 350 mm |
Weight: 170 kg
Equivalent to HT 400/1200, HT 380/3000.
But OPS-852's main shaft torque is 3 times stronger than HT400/1200.
Description
OPS852 gearbox for combined drive systems is designed for vehicles with a drive train over 18 tons, calling for very low speeds and easy control during work (hydrostatic), and requiring mechanical drive be restored during transfer, so that top speed can be reached. Some application examples are; vehicles for street sweeper trucks and airport forwards (sweepers), high-pressure and vacuum cleaning vehicles, sewer cleaners and septic tankers, street flushers. Groups for the mechanical and hydrostatic drive with flange mounts for hydraulic pumps and motors. They are set up to a couple of hydraulic pumps and a hydraulic motor that, when connected through a hydraulic circuit, permits the conversion of the vehicle’s traction from mechanical to hydrostatic.
| Main Drive | |
|---|---|
| Maximum continuous torque | 3.000 Kgm I 29.420 Nm |
| Output Shaft - UPPER POWER TAKE-OFF | |
| Maximum continuous torque Maximum torque (special version) |
110 Kgm I 1.100 Nm * 200 Kgm I 2.000 Nm |
| Speed / RPM | |
| Output ratio | 1 / 1,27 |
| Auxiliary Output - Hydrostatic | |
| Torque | 80 Kgm I 785 Nm |
| Max. output power | |
| Output ratio | 1 / 2,30 |
Additional Hydraulic pump output: 400 Nm and 35 kW Power
* Contact us for higher power, torque, or special ratio requirements.
Description
Weight: 181 kg
Equivalent to PZB 42903 HT, 42904 HT, 4.2.90.3.HT. - 4.2.90.4.HT, PFT-PCH/3000,
* tailor-made gearboxes, custom made gearbox, bespoke gearbox
| HYDROSTATIC CASE MODULE | |||
| Maximum continuous torque | 5.500 (Nm) | ||
| Maximum intermittent torque | max 7.800 (Nm) | ||
| Maximum speed | 3.100 Rpm | ||
| Available drive ratios | Standard 1/4,41 * Special Hydraulic motor ratio is: i= 1:17,28 | 22 | 31 |
||
| MAIN DRIVE | |||
| Maximum continuous torque | 3.000 Kgm | 30.000 Nm | ||
| Maximum intermittent torque | 3.500 Kgm | 35.000 Nm | ||
| Maximum intermittent torque (special version) | |||
| Maximum speed | 3.300 (rpm) | ||
| AUXILIARY OUTPUTS | |||
| 1-UPPER POWER TAKE-OFF | |||
| Maximum power available at the shaft Maximum intermittent available torque Power take-off operational with vehicle |
From 340 (kW)* to 380 (kW)* 2.200 (Nm)* Stationary and in motion |
||
| Ratio | 1/1,28 (standard), 1:1 (special) | ||
| 2-INTERMEDIATE POWER TAKE-OFF (Hydraulic) | |||
| Maximum power available at the shaft Power take-off operational with vehicle |
|||
| Ratio | 1/1,23 | ||
| Shaft distance | 438 mm | ||
| * Contact us for higher power, torque, or special ratio requirements. | |||
| * OPS 923 series can transmit 4,200 NM torque at 2.000 RPM | |||
| DESCRIPTION: For Hydrostatic and Mechanical Transmission. Creep Drive. Dual clutch drive for top Hydraulic pumps and hydrostatic driveline for creep control. * Equivalent to PFT-PCH/3000 The Transfer Case OPS923/H with a hydrostatic case module mounted at the main transmission output. It has been designed primarily for dry vacuum equipment, road and airport maintenance vehicles for asphalt regeneration, and vehicles for hi-rail applications. |
|||
